HD-SDI Video tester

Product descriptions

Specification
Feature
Drawing
Accessory
Download
Products Series

7inch TFT-LCD screen / 800(RGB) × 600 resolutions /SDI HD image display and output /Support
resolution 1920 × 1080, 1080 × 720/ USB 5V 2A power out, as a power bank New 7 inch SDI HD
CCTV camera tester is specially design for IP camera’s installation and maintenance, both for
Analog and   SDI camera image display and output, with PTZ control, improve working efficiency.
SDI HD CCTV camera tester built in PTZ control, PING testing, IP address scan, Port flashing ,
TDR cable tester ,DC12V /2A output power ,Audio test, Cable search, Color bar generator ,Video
level meter, SD card etc , it is necessary tools for SDI digital and analog monitor ,fiber and integrated
wiring construction.

Feature

1. English/Chinese and other languages optional
2.7 inch LCD screen display,800*600 resolution NEW
3.HD SDI digital camera image display and output * NEW (optional)
4.VGA, HDMI signal input display, convenient to DVR / NVR setting NEW
5.DC12V 2A power output for camera NEW
6.USB 5V 2A power out, as a power bank NEW
7.LED Lamp，easy to operate at night
8.Micro SD card moveable
9. User-defined shortcut keys（F1 and F2）
10. LCD screen brightness/contrast/color Saturation adjustable
11. Automatically adapts and displays the video format of NTSC/PA
12.Enhanced color bar generator, by receiving the video color bar to test the video channel whether
     transmit normally
13.Optical Power Meter, it can measure the optical power value*(Optional)

14.Digital Multi-meter, voltage, current, resistance and capacitance can be tested, continuity testing,
     diode testing (*(Optional)
15.10xzoom,video image can be magnified to view the details, easy to use （only for analog video test）
16. Video record and playback （only for analog video test）
17.Snapshot and save the current image as JPG file in the SD card（only for analog video test）
18.PING testing，test IP camera or other network devices’ Ethernet port whether work normally, and the
     IP address whether right
19.Video signal level test
20.PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement *NEW
21.Cable scan, Send the specific signal, easy to find the connected cable.*(Optional)
22.IP address scan, quickly search the IP address for the connected IP camera and other network
     devices
23.POE voltage measurement，test the PoE switch’s voltage to IP cameras, wireless AP device and
     other PD devices.
24.Device Port flicker，easy to find the connected PoE switch port by sending special signals, the
     connected PoE port will flicker at special frequency.
25.Link monitor; check the setting IP address whether occupied.
26.TDR cable tester ,cable length and short – circuit measurement( BNC cable, network cable etc) * (Optional)
27.PTZ address scan, search up the ID of PTZ camera.
28.Network cable and Telephone cable testing, display the sequence of connection and the NO of the
     LAN cable
29.Support RS232/RS485/RS422，Rate 600 ～ 115200bps adjustable
30.Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D,
     SAMSUNG
31.PTZ protocol analysis, control protocol command displays to check RS485 transmission
     whether is normal, easy to find the fault device
32.PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and
     sets and the preset position
33.Audio input test, test the audio signal from pickup devices
34.Visual fault locator , to test fiber’s bending and breakage * (Optional)
35.Lithium Ion Polymer Battery .The device employs advanced power control and protection circuit.
    The device is high power-efficient, energy saving and environmental protection. It can last 17
    hours for normal use after charging for 7 -8 hours.

Specification

Model		SDI-3600
SDI digital Video Signal *
Video IN/OUT		1 channel SDI IN BNC& 1 channel Output
HDMI digital Video Signal *
digital Signal in		1 channel HDMI in，support 1080P,720P
Video Test
Signal mode			NTSC/PAL (Auto adapt)
Video Output Mode			1.0 Vp-p
Display			7inch TFT-LCD, 800(RGB)×600 resolution
LCD adjustment			Brightness, Contrast, Saturation adjustable
Video IN/OUT			1 channel BNC Input & 1 channel Output
VGA input display
VGA input display		Receive DVR、NVR VGA signal
Video Level test
Level test		Video signals measured in IRE or mV
DC12V 2A power output
DC12V power output		Output DC12V/2A power for camera
5V power output
Power output		Output 5V power for phone as power bank
Audio input test
Audio input test		test the pickup and other audio equipments on the front-end
PTZ controller
Communication		Support RS232 and RS485
PTZ Protocol		Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate		600，1200，2400，4800，9600，19200,57600,115200bps
Video Signal Generation
Color bar generator		Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP Cable tester
UTP cable test		Test UTP cable connection status and display in the screen. Read the number of the test box.
RS485 /232data analysis
Data Monitor		Captures and analyzes the command data from controlling device
10x Zoom Image
Image 10x zoom		10x zoom image display and video out
Photograph、Video record, Record playback
Photograph		snapshot and save the current image as JPG file
Video record		Video record and storage the file
Record playback		To view the storage file in the SD card
Port flicker
Port flicker		Find the connected POE port quickly.
IP scan、Link monitor、PING test
IP scan		Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor		Check the IP address whether is occupied
PING testing		Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
Cable scan *
Cable scan	Search the cable by the audio signal
PoE test
PoE test	Display the power supply voltage and cable connection states
POWER
Power Adapter		DC 5V（2A）
Battery		Built-in 7.4V Lithium polymer battery ,6500mAh
Rechargeable		After charging 6-8 hour, working time lasts 17 hours
Low Consumption		Energy saving technology, the battery icon real-time display
Parameter
Operation setting		English/Chinese and other languages OSD menu
Auto off		5-60 (mins)
Keytone		On/Off
General
WorkingTemperature		-10℃ ～+50℃
Working Humidity		30%～ 90%
Dimension/Weight		256mm x 173mm x 50mm / 1.2kg

Note: * sign means optional function