8CH Passive Video Balun

Product descriptions

Specification
Feature
Drawing
Accessory
Download
Products Series

Overview:

The RX-908TP video balun is a passive(non-amplified)device that allows the transmission of real-time CCTV video signal via cost-effective Unshielded Twisted Paired(UTP)cable.Baseband(composite)signals of any type are supported.

The RX-908TP supports pluggable screw terminal .RX-908TP is also compatible with all the other RXTEC passive transceiver for application at distance up to 1100ft(330m)and active receiver up to 4500ft(1500m).

The suerrial interference rejection and low emissions of the RX-908TP allow vieo signals to coexist in the same wire bundle as telephone,datacom,or low voltgae power circuits.This allows the use of a shared or existing cable plant.RX-908TP has built-in surge suppression to protect video equipment against damaging voltage spikes.Its crosstalk and noise immunity enusure quality video signals.

Model		8 Channel Passive Video Transceiver (RX-908TP )
Applied Devices		CCTV cameras, monitors, DVR, switchers, IP encoders, etc
Video	Video Format	PAL, NTSC, SECAM
	Operating Frequency	DC to 8MHz
	Max Distance	UTP Category 5e (24AWG) Color: 1100ft(330m) B&W: 1950ft(600m)
	Common-mode/Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
	Impedance	28PIN UTP Terminal Block ; 8BNC (female) Connector
	Attenuation	1.5 dB typ Max
Wire Type	Network Wiring	One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
	Category Type	2 or better
	Impedance	100 ± 20 ohms
	DC Loop Resistance	52 ohms per 1,000ft (18 ohms per 100m)
	Differential Capacitance	19 pF/ft max (62 pF/m max)
Power		No external power required
Connector	Video input/output	BNC connector
Connector	Video input/output	Screw terminal
Mechanical	Housing	Aluminum alloy
	Body Color	Dark blue
	Dimensions (LWH)	1207832mm(with BNC)
	Net Weight	650g
Environmental	Operating Temperature	-20º ~ 70º C
	Relative Humidity	0~95% (non-condensing)
	Storage Temperature	-40º ~ 150º C